 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STGB14NC60KD STGF14NC60KD - STGP14NC60KD N-channel 14A - 600V - TO-220 - TO-220FP - D2PAK Short circuit rated PowerMESHTM IGBT General features Type STGB14NC60KD STGF14NC60KD STGP14NC60KD VCES 600V 600V 600V VCE(sat) (Max)@ 25C <2.5V <2.5V <2.5V IC @100C 3 14A 7A 14A 1 1 3 2 TO-263 TO-220 Low on-voltage drop (Vcesat) Low Cres / C ies ratio ( no cross conduction susceptibility) Switching losses include diode recovery energy Very soft ultra fast recovery antiparallel diode Short circuit withstand time 10s 3 1 2 TO-220FP Internal schematic diagram Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the Power MESHTM IGBTs, with outstanding performances. The suffix "K" identifies a family optimized for high frequency motor control applications with short circuit withstand capability. Applications High frequency inverters SMPS and PFC in both hard switch and resonant topologies Motor drivers Order codes Part number STGB14NC60KD STGF14NC60KD STGP14NC60KD Marking GB14NC60KD GF14NC60KD GP14NC60KD Package DPAK TO-220FP TO-220 Packaging Tape & reel Tube Tube April 2006 Rev 2 1/17 www.st.com 17 Contents STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ........................... 7 3 4 5 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Electrical ratings 1 Electrical ratings Table 1. Symbol VCES IC (1) Absolute maximum ratings Value Parameter TO-220/DPAK TO-220FP Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Diode RMS forward current at TC = 25C Insulation withstand voltage A.C.(t = 1sec; Tc = 25C) Short circuit withstand time, VCE = 0.5VBR(CES) , Tj = 125C, RG = 10, VGE = 12V Storage temperature - 55 to 150 Operating junction temperature C -10 25 14 50 20 20 2500 600 11 7 V A A A V A V s Unit IC(1) ICM (2) VGE IF VISO tscw Tstg Tj 1. Calculated according to the iterative formula: T -T JMAX C I ( T ) = --------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C 2. Pulse width limited by max junction temperature. Table 2. Symbol Rthj-case Rthj-amb TL Thermal resistance Value Parameter TO-220/DPAK TO-220FP Thermal resistance junction-case Max Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose (1.6mm from case, for 10sec.) 1.56 62.5 300 5.6 C/W C/W C Unit 3/17 Electrical characteristics STGB14NC60KD - STGF14NC60KD - STGP14NC60KD 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol VBR(CES) IGES ICES VGE(th) VCE(SAT) gfs (1) Static Parameter Test condictions Min. 600 150 1 100 4.5 2.0 1.8 3 6.5 2.5 Typ. Max. Unit V A mA nA V V V S Collector-emitter breakdown IC= 1mA, VGE= 0 voltage Collector-emitter saturation voltage Gate threshold voltage Collector-emitter leakage current (VCE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= Max rating, TC= 25C VCE= Max rating, TC= 125C VGE= 20V , VCE= 0 VCE= V GE, IC= 250A VGE= 15V, IC= 7A VGE= 15V, IC= 7A, Tc= 125C VCE = 15V , IC = 7A 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5% Table 4. Symbol Cies Coes Cres Qg Qge Qgc Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test condictions Min. Typ. 760 86 15.5 34.4 8.1 16.4 Max. Unit pF pF pF nC nC nC VCE = 25V, f = 1 MHz, VGE= 0 VCE = 390V, IC = 7A, VGE = 15V (see Figure 18) 4/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Electrical characteristics Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test condictions VCC = 390V, IC = 7A RG= 10, VGE= 15V, Tj= 25C(see Figure 17) VCC = 390V, IC = 7A RG= 10, VGE= 15V, Tj= 125C (see Figure 17) Vcc = 390V, IC = 7A, RGE = 10 , VGE = 15V TJ = 25C (see Figure 17) Vcc = 390V, IC = 7A, RGE = 10 , VGE = 15V Tj = 125C (see Figure 17) Min. Typ. 22.5 8.5 700 22 9.5 680 60 116 75 24 196 144 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns Table 6. Symbol Eon Eoff (2) Ets (1) Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test condictions VCC = 390V, IC = 7A RG= 10, VGE= 15V, Tj= 25C (see Figure 17) VCC = 390V, IC = 7A RG= 10, VGE= 15V, Tj= 125C (see Figure 17) Min Typ. 82 155 237 131 370 501 Max Unit J J J J J J Eon (1) Eoff (2) Ets 1. Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pack diode, the co-pack diode is used as external diode. IGBTs & DIODE are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current. 5/17 Electrical characteristics STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Table 7. Symbol Vf trr Qrr Irrm trr Qrr Irrm Collector-emitter diode Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test condictions If = 3.5A If = 3.5A, Tj = 125C If = 7A, VR = 40V, Tj = 25C, di/dt = 100A/s (see Figure 20) If = 7A, VR = 40V, Tj = 125C, di/dt = 100A/s (see Figure 20) Min Typ. 1.3 1.1 37 40 2.1 61 98 3.2 Max 1.9 Unit V V ns nC A ns nC A 6/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Electrical characteristics 2.1 Figure 1. Electrical characteristics (curves) Output characterisics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Collector-emitter on voltage vs collector current Figure 6. Normalized gate threshold vs temperature 7/17 Electrical characteristics Figure 7. STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Figure 8. Gate charge vs gate-emitter voltage Normalized breakdown voltage vs temperature Figure 9. Capacitance variations Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 8/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Figure 13. Thermal impedance Electrical characteristics Figure 14. Turn-off SOA Figure 15. Thermal impedance for TO-220FP Figure 16. Turn-off SOA for TO-220FP 9/17 Test circuit STGB14NC60KD - STGF14NC60KD - STGP14NC60KD 3 Test circuit Figure 18. Gate charge test circuit Figure 17. Test circuit for inductive load switching Figure 19. Switching waveforms Figure 20. Diode recovery times waveform 10/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/17 Package mechanical data STGB14NC60KD - STGF14NC60KD - STGP14NC60KD TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 12/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Package mechanical data TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 G 13/17 Package mechanical data STGB14NC60KD - STGF14NC60KD - STGP14NC60KD D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 14/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 15/17 Revision history STGB14NC60KD - STGF14NC60KD - STGP14NC60KD 6 Revision history Table 8. Date 14-Jun-2005 05-Jul-2005 22-Jul-2005 27-Jan-2006 28-Apr-2006 Revision history Revision 1 2 3 4 5 New release Complete version Value changed in table 6 Inserted ecopack indication New template, modified curves 5 and 7 Changes 16/17 STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17 |
Price & Availability of STGB14NC60KD06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |